Use this double-sided socket tool for installing and removing both 48.5mm and 44mm 16-notch bottom bracket cups. Socket is machined for 1/2-inch drive, but a 3/8-inch to 1/2-inch adapter is included so you can use it with 3/8-inch drive torque wrenches. - Compatible with all Wheels Manufacturing bottom brackets that have 48.5mm or 44mm, 16-notch spline patterns - Also compatible with FSA MegaEVO BB cups, Shimano, SRAM/Truvativ, Campagnolo Ultra Torque, and FSA - Machined 6061 aluminum - Anodized red

Our 6806 open bore adapter is used to press 42x30 sealed bearings. The adapter is machined with one step at 30mm ID, which fits into the center of the sealed bearing. Common bearing size for BB30 frames and bottom brackets. - Installs: 6806 bearing - Inner step outer diameter: 29. 9mm - Outer diameter: 41. 8mm - Thickness: 7mm - Thru hole diameter: 0. 387" (9. 8mm) - Inner hole sized to fit 1/2" threaded rod - Compatible BP0006, BP0007 - Machined, red anodized aluminum - Sold individually (2 drifts required for some installations)

- Machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. - Precision machined aluminum body. - Anodized in Wheels MFG red.

- Machined to match manufacturer specifications and designed to be used with a 1/2" drive socket or torque wrench for easy installation and removal of e-bike lockrings. - Precision machined aluminum body. - Anodized in Wheels MFG red.

- SRAM Thin Flange T47 Bottom Bracket Socket Designed to create a tight grip on thin flange bottom bracket to avoid slipping while torquing cups into bike frames. - This single-sided socket is used for installing and removing 52mm, 16-notch bottom bracket cups. - The socket has a machined 3/8" drive, which can be used to allow 3/8" drive torque wrenches to be attached and locks onto a 1/2 inch UNC press rod for secure and easy installation of thin flanged bottom brackets. - Machined 6061 Aluminum Anodized Red

The dropout saver system is an alternative to replacing badly bent or damaged derailleur dropouts. Rather than replacing the damaged dropout completely, simply drill out the damaged threads, install a dropout saver, and realign the dropout. Kit includes: - (1) 15/32-inch reduced shank drill bit - (2) DS-1 wide dropout savers     - (3) DS-2 narrow dropout savers    

- Drift and over axle set for less common thru axle hube and frame bearings - For use with 3/8" press rod - See wheelsmfg.com for full list of contents

- Allows for quick and accurate positioning at the press of a button - Slides along 1/2" UNC threaded press rod when the button is depressed and can be placed quickly to secure drifts, spacers, and cups when completing maintenance or installation of bike headsets, bottom brackets, and bearings

Complete tool kit for installing wheels manufacturing bottom brackets. Kit includes our new bottom bracket socket tool for installing our BB cups, along with new sealed bearing drifts for the following ID bearings: - 22mm - 24mm - 29mm - 30mm Bottom bracket press pro install kit includes: - UNC 48mm 16-notch socket x 1 - 22x37 drift 1/2" x 1 - 6806 OB 1/2" x 2 - 24x37 OB 1/2" x2 - 1/2" frame drift x 1 1/2-13 x 9. 7" - threaded rod unc x 1 44-48. 5mm - double 16-notch 1/2" socket x 1 - threaded handle x 2

This 29mm open bore adapter is used to press 29mm x 42mm (DUB) sealed bearings. The adapter is machined with one step at 29mm OD, which fits into the center of the sealed bearing. For use with Wheels Mfg. bottom bracket press (PRESS-7 , PRESS-7-PRO or PRESS-9-PRO). - Inner step outer diameter: 28.9mm - Outer diameter: 41.8mm - Thru hole diameter: 12.8mm (1/2-inch) - Thickness: 7mm - Machined, red anodized aluminum - Sold individually

- Essential bottom bracket bearing extractor set - (1) 6806 extractor, (1) 24x37 extractor, (1) 29 DUB extractor, (1) 22mm GXP extractor

Precision-machined anodized aluminum designed to allow for easy adjustment of the Fox DHX2/FLOAT X2 shocks requiring a 3mm and 6mm hex wrench. This small, pocket-sized tool allows for easy trail-side adjustments.

Wheels Manufacturing Sealed Bearing Extractor - 25mm Fits: - 6805 - Other bearings with inside diameter of 25mm

The Wheels Manufacturing universal bottom bracket drift presses all current Wheels Mfg bottom bracket cups into your frame or bearing cups. The adapter is machined with multiple steps to fit common bottom bracket shell and bearing diameters listed below. Each step is laser etched with the diameter size. - Inner hole sized to fit 1/2" threaded rod. Not for use with Wheels Mfg PRESS-1 or PRESS-4 - Compatible with any other press with a 1/2" diameter rod - Recommended for use with Wheels Mfg Universal BB Press - Machined aluminum - Anodized Red - Sold individually - Drift can also be used as a frame bottom bracket shell sizing guide! Fits the following bottom bracket shell sizes: - BB30 (42mm) - PF30 (46mm) - BB86, BB92 (41mm) - BBRight (46mm) - BB386EVO (46mm) - Cannondale BB30A (42mm) - Cannondale PF30A (46mm) - Specialized Carbon OSBB (46mm) - Specialized Alloy OSBB (42mm) - TREK BB90, BB95 (37mm) - PF24 (41mm)

- Bearing extractor set for medium bearings - (1) 6002, (1) 6003, (1) 6804, (1)6805

Designed to press in all current wheels mfg bottom brackets! our universal bottom bracket frame drift is designed to press all current wheels mfg bottom bracket cups in to your frame. The adapter is machined with multiple steps to fit common bottom bracket shell inside diameters listed in the compatibility tab below. Each step is laser etched with the diameter size. Drift can also can be used as a frame bottom bracket shell sizing guide! - Inner hole sized to fit 1/2" threaded rod. (Not for use with our Press-1 or Press-4 ) - Compatible with any other press with a 1/2" diameter rod - Recommended for use with Wheels Mfg BP0006, BP0007 - Machined aluminum - Anodized red - Sold individually We do not recommend it for use with press with a rod diameter less than 1/2". When used with a smaller rod, it is almost impossible to prevent the cups or bearings from pressing in straight.

Our 2437 open bore adapter is used to press 24x37 sealed bearings into bottom bracket cups, and direct fit frames like trek BB90. The adapter is machined with one step at 24mm ID, which fits into the center of the sealed bearing. - Installs: 24x37 bearing - Inner step outer diameter: 23. 8mm - Outer diameter: 36. 8mm - Thru hole diameter: 0. 387" (9. 8mm) - Inner hole sized to fit 1/2" threaded rod - Compatible with BP0006, BP0007 - Machined, red anodized aluminum - Sold individually (2 drifts required for some installations)