- Aluminum straddle cable carrier for cantilever brake

This is an FSA MegaExo Crank Arm Bolt for 19mm MegaExo alloy cranks - Designed to fit alloy FSA cranks only - Includes M12 bolt, M27 self-extracting cap, and washers

-1-1/4" headset spacer kit with following sizes: 2.5mm(x1) .5mm(x2) 10mm(x2)

-Seatpost clamp for 2014 TCX Advanced models

-Seatpost clamp for 2014 TCX SLR models

The new CX Single Ring Chain Guide is designed to prevent your chain from dropping off single-ring setups and built strong enough to endure brutal conditions of cyclocross. Specifically designed to be used in combination with SRAM CX1 and other single-ring setups. The lightweight aluminum cage limits lateral movement of the chain, the leading cause of chain derailment, adding high-end K-Edge quality insurance to your CX bike. Key Features and Benefits: - Full-cage design for chain retention under the most abusive cross situations - Braze-on mount and braze-on adapter clamp compatible - Fully adjustable for height, center-line, and angle - Optimized for 10 and 11spd drivetrains Attributes (specs): - CNC Machined from 6061-T6 Aluminum (no plastic parts) - Stainless Steel Hardware - Weight: 60.8 grams (excluding braze-on adapter clamp) - Compatibility: Single-ring bikes; frames with integrated braze-on front derailleur mount; also compatible with braze-on adapter clamps. All necessary hardware included - Optimized for 34T to 44T Chain Rings - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded

The Southpaw family of remote levers are designed for a secure feel without added complexity and weight, while incorporating ergonomics that compliment modern cockpits. - Ergonomically designed for 1x setups - Universal lever body - Integrated barrel adjuster - Stainless steel hardware - Understated graphics

NEW: Please refer to our chart for the correct adapter size you need. Disc brake adaptors available for Shimano, SRAM, Hope, Hayes, Formula, etc. rotors CNC machined from 6061 T6511 aluminum. Machined surfaces allow for better caliper alignment and a more rigid brake setup. The Post Mount standard is universal for front and rear brakes. Frames and forks that use the post-mount brake interface use a stock size varying from 160mm to 203mm. It’s important to check your frame and fork for the default post mount size before ordering a suitable adapter. To calculate the size of the required adapter, subtract the frame/fork stock mount size from the desired rotor size. If you’re using brakes with large calipers (Magura MT5/MT7, Hope Tech V4, Hayes Dominion A4, etc.), please also order a low profile (button head) bolt kit to ensure correct fitment. Our disc brake adapters do not come with mounting bolts but if needed, we have sets of 4 bolts available. Not currently compatible with TRP 203mm rotors.

Converts braze-on front derailleurs to clamp-on. Available in multiple clamp diameters.

Sold individually or as part of Problem Solvers' 6-bolt adapter assembly, this lock ring is meant for use with Shimano Center Lock compatible hubs. - External splines; compatible with external bottom bracket tools - For use with 12 – 20mm thru-axles - Aluminum construction

The Problem Solvers Center Lock Adapter Kit allows riders to use 6-bolt rotors on Shimano Center Lock compatible hubs. - Not intended to be used with rotors over 180mm in diameter - Made of extruded, CNC-machined, and broached AL-6061-T6 - Designed for use with Center Lock hubs and 6-bolt disc brake rotors

The Problem Solvers Compression Plug for 1 1/8-inch Forks is for threadless aluminum and carbon forks. It fits tightly inside the fork and provides easy headset adjustment and a nice, clean look.

Downtube cable adjusters from Problem Solvers. - Braze-on downtube adjusters for road shifters - Contoured to fit traditional sized steel downtubes - Black Finish

I-SpecBar Clamps are a one-piece hinged clamp adapter that allows users to mount I-Spec compatible shifters or dropper levers onto the handlebar, without requiring an I-Spec brake lever. - Sold individually, the clamp can be mounted to the right or left side - Hinged clamp for easy installation without removing other components - Black Anodized, CNC AL-6061 Aluminum - Compatible only with Shimano I-Spec II compatible shifters or dropper post remotes - 23g

Notched binder bolts for frames with integrated seat collars. Details: CroMoly steel bolts Three lengths available: 16, 19 and 21mm 8mm diameter

Replacement bolts for Super Logic stems. Original equipment stem hardware ensures exact fit and finish. - Bit Size: 4mm - Thread Pitch: M5 - Length: 4x 16mm, 2x 18mm

Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.

Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.

SRAM BB30/English Bottom Bracket Adaptor allows conventional threaded bottom brackets to be installed in a BB30 frame; 68mm shells only - Install with headset press and green Loctite

Disc brake mount adaptor. - Includes stainless steel adaptor and caliper bolts

Ergonomic design for comfort in a variety of hand positions. -Compatible with SRAM eTap Shifting/Brake Levers

The SRAM Universal Derailleur Hanger (UDH) consolidates thousands of hanger options across the industry, while protecting your derailleur against chain jams by pivoting back and out of the way, and slipping slightly when encountering impacts. It improves shifting performance, guarantees better alignment, and works with all drivetrains. - The Universal Derailleur Hanger consolidates thousands of mountain bike derailleur standards - UDH is designed to rotate rearward in the event of impact, and features the ability to “re-rail” the chain back onto the small cog - It works with all commercially available MTB and E-MTB drivetrains from Shimano to Box to Sunrace

Hose fittings fit many of SRAM's newest hydraulic brake models. - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes

Hose fittings fit many of SRAM's newest hydraulic brake models. - Includes 5 Threaded Hose Barbs, 5 Compression Fittings, 1 T8 Torx Wrench - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes

Shimano BT-R1A External Di2 Battery - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware - Di2 External Battery, battery charger, and power cable are universal between Dura-Ace 9070, 7970, Ultegra 6870, 6770 and Alfine Di2 systems - Battery weight: 71 grams

This replacement bolt unit ensures your I-Spec II shifters, dropper levers, and/or brake levers are securely fastened. Make sure your controls are ready to rip.

- Crown Race MX - Size: MX TH 26.4mm

- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction

Replacement dropout screws for the Surly Cross Check. - Bolt length: 40mm

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (3) M4x8 Flat Head Screws